Materials

Materials & craftsmanship

The life of outdoor furniture is decided by how its materials behave under UV, salt spray and temperature swings.

PE wicker (HDPE)

HDPE extruded into strand and hand-woven over an aluminium tube frame. It does not absorb water or grow mould, and UV resistance can be rated beyond 3,000 hours.

Best for: Coastal sites, poolside and rainy climates — the safest choice among woven outdoor materials.
Care: Rinse with water; for stubborn marks use a mild detergent and a soft brush. Avoid sharp edges.

Outdoor rope (polyester / olefin)

Continuous rope woven in one run, with even tension. Softer than wicker and closer in feel to an upholstered sofa — the dominant approach in high-end outdoor furniture today.

Best for: Minimalist schemes, resort projects, and any setting that needs a softer look.
Care: Brush off dust and let it dry naturally after rain. Do not use a pressure washer at close range.

Teak

High in natural oil and silica, teak is one of the few timbers that can stay outdoors without a finish. Sun turns it silver-grey — normal oxidation that does not affect strength.

Best for: Courtyards, terraces and climates with wide temperature swings.
Care: Apply teak oil once a year to keep the original tone, or leave it to weather. Raise it off surfaces where water pools.

Aluminium (6063)

Light and rust-free. After chromate pre-treatment the surface is powder-coated and cured at 200°C, giving consistent colour and strong adhesion.

Best for: Almost any climate, especially humid and high-salt-spray environments.
Care: Wipe with a damp cloth. In coastal use, rinse off salt deposits periodically.

Fabrics and cushions

Quick-dry foam with a water-repellent polyester or acrylic cover that can be removed for washing. The open-cell structure lets rain pass straight through instead of pooling.

Best for: Poolside and furniture that stays out in the open.
Care: Covers can be machine washed cold on a gentle cycle; stand the foam up to dry. Avoid stacking while damp.

Climate

Matching material to climate

Environment	Recommended
Coastal / high salt spray	Aluminium frame + PE wicker, with 316 stainless hardware
High UV / hot and dry	Aluminium + Textilene mesh; avoid dark heat-absorbing fabrics
Rainy / humid	Aluminium + PE wicker; avoid solid timber where water pools
Wide temperature swings	Teak or thick-wall aluminium; avoid thin-wall metal and brittle materials

Craft

How a piece is made

Frame forming

Tubes are cut, bent and welded to drawing, the welds ground flush, the whole frame chromate-treated, then powder-coated and cured at 200°C.

Hand weaving

Wicker or rope is woven continuously from the inside out, with ends concealed beneath the seat so no joints show. Uneven tension directly shortens service life.

Upholstery

Double-stitched seams with taped main joints to limit water ingress through stitch holes. Zips are corrosion-treated.

Hardware

304 stainless as standard, with 316 recommended for coastal or high-humidity projects. Exposed bolts are countersunk or capped.